Cool build! If you need an easy way to pollish tiny little detail parts, i cut little discs of scrap cloth, and put them on the same holder as for the dremel cut off discs, jean fabric and felt work well, then you can charge with same polishing compound as youd use on a cloth wheel on the bench grinder, they work great for tight spaces, and are basically free. And as we all know, all the good flap wheels and other grinding consumables of good quality are getting $$$ these days, hah.
Everything looks great. I would recommend to reinforce the wheel pivot-to-fork tube joint with a partial radius via tubular sleeve to diffuse lateral forces on the butted-weld sheer line. The weld looks decent, fusion is probably not an issue but it looks like you didn't wrap the welds/tie-in all the way around the tab and that gap is a potential failure point where vibration/ and directional torsion/side -loading/compression can occur and generate a crack in the weld. Hope this message finds you well.
Howdie from CANADA 🍁 SK glad l found ya coooool build keep it up some people need to chill until they make one like this sit bk and enjoy the great work of this is enjoyable to see don't have to have a degree or rocket science test to make this so glad for ya sharing your project with us good luck 🤞 😊
Thats a fun looking build. Please do large sections of the video with no music and jut the workshop sounds. I like the sounds of a workshop and really dont need or want the backing music. The 5sec repeating sound clip is way too much. Maybe for a 5min video, but almost 1hr?
I saw the video notice in my box and the first thing I saw was the Honda all jacked up I haven't laughed so hard in a long time I love it . this is going to be good when it's done
Cool build, your choice of background music might be a little monotonous for some. The home built springer front end is well done, but I’d imagine you might have more then just the front end involved with this build, let’s see all of it..
Durchaus gute Arbeit, du verstehst dein Handwerk. Bei uns in Deutschland undenkbar so etwas legal zu bekommen. Ich glaube ihr in Japan habt es da besser. Beste Grüße von einem deutschen Motorradmechaniker.
![[asmr ver]Chapter3 HONDA DAX custom project[make a front fork]](http://i.ytimg.com/vi/eEjgH3AO2Qo/mqdefault.jpg)
![[asmr ver]Chapter3 HONDA DAX custom project[make a front fork]](/img/tr.png)
This is easily one of the coolest builds I’ve seen! I love that you’re making almost every single bit from scratch!
Already looks legendary
ありがとうございます。
バイクじゃないですけど、良い物を作りたいです。
この車両の作業動画ずっとみてられる
気づいたら50分経ってた。
こんなに釘付けになる動画他には無い。
撮影の手間暇や作業内容を考える割に合わないと思う。
だから次が待ち遠しい。
Try 2strokestuffing
Beautiful record of how to hand build a custom springer front end, amazing work, thanks for filming and sharing 👍
apart from the weld on lower axel plates, this was awsome! cant wait for the next one!
Excellent work, that is a beautiful springer you made from scratch!
Cool build! If you need an easy way to pollish tiny little detail parts, i cut little discs of scrap cloth, and put them on the same holder as for the dremel cut off discs, jean fabric and felt work well, then you can charge with same polishing compound as youd use on a cloth wheel on the bench grinder, they work great for tight spaces, and are basically free. And as we all know, all the good flap wheels and other grinding consumables of good quality are getting $$$ these days, hah.
Wow!!! Great job!!!! Awesome workshop!!! Very good skils, combo!!
ニヤニヤが止まらなくなる😁
もうカッコいい👍
ありがとうございます。
僕もニヤニヤしながら作ってます。
how can this dude be so smooth machining??? everything its calculated and results are as expected.
Everything looks great. I would recommend to reinforce the wheel pivot-to-fork tube joint with a partial radius via tubular sleeve to diffuse lateral forces on the butted-weld sheer line. The weld looks decent, fusion is probably not an issue but it looks like you didn't wrap the welds/tie-in all the way around the tab and that gap is a potential failure point where vibration/ and directional torsion/side -loading/compression can occur and generate a crack in the weld. Hope this message finds you well.
No worries buddy, this is not meant to be ridden. At least I wouldn´t missing a front brake :)
Good job mate & look forward to seeing your Bike finished 👍
こういうのが欲しい。車両も技量も。続き急がず待ってます。
That’s going to be awesome. I like the chill music too 🤙🏻
outstanding fabrication super cool bike💯
Howdie from CANADA 🍁 SK glad l found ya coooool build keep it up some people need to chill until they make one like this sit bk and enjoy the great work of this is enjoyable to see don't have to have a degree or rocket science test to make this so glad for ya sharing your project with us good luck 🤞 😊
Was intrigued all the way through 👍👍👍
I've been waiting, almost a year's from your last video.... really nice build
待ってました～
シグネットの工具良さげですね
お待たせしました。DAX以外の事も忙しく10ヶ月ぶりの更新となってしまいました。
シグネットさんの工具良いですね！
自動車整備でも使う機会が多いです!
Great work ! Cannot wait to see it finish !
ありがとうございます。
時間はかかりますが完成させます！
あなたの作品を見るのはいつも本当に嬉しいです！
オーヴェルニュ（フランス）の火山の力があなたとともにありますように！👀
Хорошая мастерская мне понравился очень 🏰🎩🌍🇷🇺🏍️📱🛰️👍👀👣👣👣👣👣
いつもながら高品質な動画をありがとうございました。
個人的にはろう付けの場面が素敵でした。
今後を楽しみにしていますね(^^)
Terminala hermano 💪
Me gustaría saber cómo queda y como anda
サムネの破壊力が凄いDAXが凄いことになってる！
ありがとうございます。
目立つことしか考えていません😄
初めてこのチャンネル観ました。
こういう「ガチのものづくり」の人は、カスタムじゃなくハンドメイドって言っても良いと思います。
応援してます！
Thats a fun looking build. Please do large sections of the video with no music and jut the workshop sounds. I like the sounds of a workshop and really dont need or want the backing music. The 5sec repeating sound clip is way too much. Maybe for a 5min video, but almost 1hr?
😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂
I agree
Agreed.
I want a million dollars, but no one will give it to me. Sometimes you have to accept what you have my boy!!
@@jamonjefferies3851 wanting a million dollars is a lot different then suggesting someone to make a video with no music.
51 mins in, I think the music is forever part of me now.
love that till the end. will watch again and again.
ありがとうございます😊
誰か1人でも好きな人がいるなら頑張ります。、
Ohhh Man I had two of them 22 years ago ❤🫶🏼 in original setup naturally.
Yeees, new Video. Please more from this Bike
ありがとうございます！
お待たせしました。毎日楽しく作ってます。次の動画もいつになるかわかりませんが必ずアップロードします！
superbe projet et superbe vidéo !!! merci !!
that bike is looking bad ass
見た目しか考えていません😎
Mantap bang
頑張ります！ありがとうございます😊
Love this... nicely done
JUST PURE ART
横型エンジンはそこまで傾けると通常給油量ではオイルポンプに油面が到達しなくなり油圧が掛からなくなります
電動ポンプ化とかで対策できるか？ですね
頭を悩ませてるポイントです
とにかく見た目を優先し続けた結果公道は走行不可になりました。。。
что то на подобии тоже хочу сделать. главное начать)
Hope it rides safe.
мастер своего дела! красавчик!!!
I saw the video notice in my box and the first thing I saw was the Honda all jacked up I haven't laughed so hard in a long time I love it . this is going to be good when it's done
ありがとうございます。宙吊りダックスです！
完成まで頑張ります!
Наконец-то, я уже думал, что всё, продолжения не будет.
When will we see the next video I’m in vested now and need ideas for my bike great vid 😊
Dah lama q menunggu😊
Its amazing 😮😮😮😮
ありがとうございます。嬉しいです。
플레이트 평면 연마도 안하고 3축 용접을 하면 무슨 의미가?
Maybe you could get some engine modifications from another RUclipsr, engine taro. He’s done some really neat stuff with those Honda engines
Wow amazing job
what's the weight of this fork? it looks heavy metal )
Cool build, your choice of background music might be a little monotonous for some. The home built springer front end is well done, but I’d imagine you might have more then just the front end involved with this build, let’s see all of it..
待ってました。すでに雰囲気最高で、フロント周りが潔く、素敵すぎるのですが、ひょっとして公道不可仕様に！？
ありがとうございます
雰囲気だけを求めた結果公道は不可になりそうです😅
せめてイイモノ作りたいですね！
Not a bike guy, but yes. Keep going on brother san
その通りです。頑張ります。
随分長いこと待ってたよ
Super cool!
beautiful ☆彡
I love the overall design of the bike. I hate the swing arm though. Its the biggest detraction
This is awesome.
Quero ver o quão bonita ele vai ficar depois de pronta.
ありがとうございます。今回は綺麗なバイクにしたいです。おそらく綺麗です。
Durchaus gute Arbeit, du verstehst dein Handwerk. Bei uns in Deutschland undenkbar so etwas legal zu bekommen. Ich glaube ihr in Japan habt es da besser. Beste Grüße von einem deutschen Motorradmechaniker.
its amazing
待ってました
Not sure I'd trust my life to that smal bit of metal connecting the forks to the wheel.
wow i want that tools
Super cool
ありがとうございます😊
これで生活出来るのなら最高だね！
Needs more rake .
На сколько тонн эта вилка тяжелее заводской?😂😂😂
Me at start of video: wat da fuq?
Me at end of video: Fuq da wat?
almost a year later
I from Indonesian 😊
sorry, but springer will not work at that angle
⭐️Now THAT Is RADICAL n COOL.
✨️WITH ❤ PATIENCE IS A VIRTUE.
🤘💀🤘
👕
🩳
CHOPPER 👟👟 LIFE
溶接のシーンで目やられる…
쉽게 할걸 어렵게하는 부분이?
このエンジンの角度はいろいろヤバそうだけど。
Hell yeah brother
It's to long time build bro
that soo fckng cool
ありがとうございます！最高の物を作りたいです！
Gomu gomu
イヌイヌの実ですね。
Nice project, but tortures Audio, had to leave.
i have a cub called legenda2 in indonesia grandson of supercub
Sorry 😔, but all i saw was a well engineered bike turned into an abomination 😒.
Какие запрещенные препараты вы колите или курите , что-бы придумывать такой чудо-юдо кастом байк ?...
Yo pondría de título, como arruinar una clasica honda dax 😢
Come back
The music drives me crazy, can`t look 51min to this kind of music, sorry
ASMR versionを最近アップロードしましたのでご覧頂けるとありがたいです。
😂😂😂😂😂
😎
Not here for the Affiliate Marketing. I think what you make is cool but not enough to buy anything I can't make myself...
Бред.
Your definitely not getting anywhere including up a hill in a hurry.
😂😂😂
Very cool homie🫡🔥🔥🔥🔥🔥
Не понятно что зачем и почему и куда и для чего , короч нет интнреса
🔥